States
Showing 1–24 of 841 results
-
Alabama, Arizona, Arkansas, Code Books, Concrete/Rebar, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Virginia
(ACI Code 318-14) Building Code Requirements for Structural Concrete
Alabama, Arizona, Arkansas, Code Books, Concrete/Rebar, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Virginia(ACI Code 318-14) Building Code Requirements for Structural Concrete
The (ACI Code 318-14) Building Code Requirements for Structural Concrete provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, non-prestressed, prestressed, and composite construction.
SKU: 9780870319303 -
-
Construction, Georgia, Industries, OSHA & Safety, States
2010 ADA Standards for Accessible Design
As of March 15, 2012 all public parks, hotels, country clubs, universities, restaurants, and even condominiums must comply with far-reaching 2010 ADA Standards. This volume presents the new 2010 Standards side-by-side with explanatory guidance and background.
SKU: 9781557017567 -
Arkansas, Code Books, Construction, HVAC-R, Industries, States
2010 Arkansas Mechanical Code
The 2010 Arkansas Mechanical Code is the state-adopted regulation that establishes minimum standards for the design, installation, maintenance, and inspection of mechanical systems in buildings throughout Arkansas. It is based on the International Mechanical Code (IMC) with state-specific amendments to address local climate conditions, enforcement practices, and administrative requirements.
SKU: 5431L10 -
Code Books, Construction, Electrical, Industries, Nevada, States, Virginia, Washington D.C.
2011 National Electrical Code
Code Books, Construction, Electrical, Industries, Nevada, States, Virginia, Washington D.C.2011 National Electrical Code
NFPA 70®, National Electrical Code® (NEC®), is the authoritative document addressing electrical installations in residential, commercial, and industrial settings. The NEC is revised every three years to stay in sync with industry practices, emerging trends, and the development and introduction of technologies to provide comprehensive rules for designers, installers, inspectors, engineers, electricians, and anyone else who works in the electrical industry. The code is organized for ease of use.
SKU: 7011SB -
Code Books, Construction, HVAC-R, Industries, Plumbing, States, Utah, Washington D.C.
2012 International Fuel Gas Code (International Code Council Series) 1st Edition
Code Books, Construction, HVAC-R, Industries, Plumbing, States, Utah, Washington D.C.2012 International Fuel Gas Code (International Code Council Series) 1st Edition
- The 2012 International Fuel Gas Code (IFGC), provides minimum regulations for the safe installation of fuel gas systems and gas-fired appliances in residential, commercial, and industrial buildings. Promotes gas system safety and performance through consistent, enforceable standards. It applies to both natural gas and liquefied petroleum (LP) gas systems in residential, commercial, and industrial settings.
SKU: 3600S12 -
Construction, HVAC-R, Industries, Plumbing, States, Tabs, Washington D.C.
2012 International Fuel Gas Code Tabs
Construction, HVAC-R, Industries, Plumbing, States, Tabs, Washington D.C.2012 International Fuel Gas Code Tabs
Pre-Printed Permanent Tabs – During your exam, time is of the essence. By having your pages tabbed, you can greatly increase your speed in referencing key exam topics.
These tabs are pre-printed and permanent.
SKU: 2012IFGCTabs -
Alaska, Code Books, Construction, HVAC-R, Industries, Plumbing, States, Utah, Washington D.C.
2012 International Mechanical Code (International Code Council Series) 1st Edition
Alaska, Code Books, Construction, HVAC-R, Industries, Plumbing, States, Utah, Washington D.C.2012 International Mechanical Code (International Code Council Series) 1st Edition
- Establishes minimum regulations for mechanical systems using prescriptive and performance-related provisions. First introduced in 1996, the IMC was developed with broad-based principles that make possible the use of new materials, methods and design.
SKU: 3300S12 -
Alaska, Construction, HVAC-R, Industries, Plumbing, States, Tabs, Utah, Washington
2012 International Mechanical Code Tabs
Alaska, Construction, HVAC-R, Industries, Plumbing, States, Tabs, Utah, Washington2012 International Mechanical Code Tabs
Pre-Printed Permanent Tabs – During your exam, time is of the essence. By having your pages tabbed, you can greatly increase your speed in referencing key exam topics.
These tabs are pre-printed and permanent.
SKU: 2012IMCTabs -
Code Books, Construction, Industries, Plumbing, States, Tennessee, Washington D.C.
2012 International Plumbing Code
Code Books, Construction, Industries, Plumbing, States, Tennessee, Washington D.C.2012 International Plumbing Code
Provides minimum regulations for plumbing facilities in terms of both performance and prescriptive objectives, and provides for the acceptance of new and innovative products, materials, and systems.
SKU: 978-1609830533 -
Alaska, Code Books, Construction, Industries, States, Tennessee
2012 International Residential Code for One- and Two- Family Dwellings (International Code Council Series) 1st Edition
Alaska, Code Books, Construction, Industries, States, Tennessee2012 International Residential Code for One- and Two- Family Dwellings (International Code Council Series) 1st Edition
The 2012 International Residential Code for One- and Two- Family Dwellings (International Code Council Series) 1st Edition provides a unified, performance-based code for residential construction, improving safety, energy efficiency, and durability. It simplifies code enforcement by consolidating multiple disciplines (building, plumbing, mechanical, fuel gas, and energy) into a single document tailored for homes.
SKU: 3100S12 -
Code Books, Construction, HVAC-R, Industries, Nevada, Plumbing, States
2012 Uniform Mechanical Code
The 2012 edition of the Uniform Mechanical Code (UMC©) represents the most current approaches in the mechanical field. It is the fourth edition developed under the ANSI Consensus process and is designated as an American National Standard by the American National Standards Institute (ANSI). Contributions to the content of this code were made by every segment of the built industry, including such diverse interests as consumers, enforcing authorities, installers/maintainers, labor, manufacturers, research/standards/ testing laboratories, special experts and users.
SKU: 978-1938936197 -
Code Books, Construction, Industries, States, Virginia
2012 Virginia Building and Fire Code Related Regulations
Code Books, Construction, Industries, States, Virginia2012 Virginia Building and Fire Code Related Regulations
A comprehensive companion to Virginia’s building and fire codes, this book centralizes critical laws and specialized regulations into a single resource—making it an essential tool for ensuring compliance, understanding enforcement authority, and navigating the broader legal framework behind construction and fire safety in Virginia.
SKU: 5089L12 -
Code Books, Construction, Electrical, Florida, Industries, Kansas, Mississippi, Ohio, States
2014 National Electrical Code – NFPA 70
Code Books, Construction, Electrical, Florida, Industries, Kansas, Mississippi, Ohio, States2014 National Electrical Code – NFPA 70
The 2014 NFPA 70®: NEC® covers the latest requirements on electrical wiring and equipment installation issues, including minimum provisions for the use of connections, voltage markings, conductors, and cables.
SKU: NEC2014SB -
Code Books, Construction, Electrical, Industries, Mississippi, States, Tabs
2014 National Electrical Code Tabs
Code Books, Construction, Electrical, Industries, Mississippi, States, Tabs2014 National Electrical Code Tabs
2014 National Electrical Code- Pre-Printed Permanent Tabs – During your exam, time is of the essence. By having your pages tabbed, you can greatly increase your speed in referencing key exam topics.
SKU: 2014NECTABS -
Code Books, Construction, Industries, States, Virginia, Wisconsin
2015 International Building Code for One- and Two-Family Dwellings
Code Books, Construction, Industries, States, Virginia, Wisconsin2015 International Building Code for One- and Two-Family Dwellings
The scope of the International Building Code® (IBC®) includes all buildings except detached one- and two-family dwellings and townhouses up to three stories.
SKU: 3000S15 -
Code Books, Construction, Georgia, Industries, States, Wisconsin
2015 International Energy Conservation Code 1st Edition
Code Books, Construction, Georgia, Industries, States, Wisconsin2015 International Energy Conservation Code 1st Edition
The IECC addresses energy efficiency on several fronts including cost savings, reduced energy usage, conservation of natural resources and the impact of energy usage on the environment.
SKU: 978-1609834869
