North Carolina
Showing 1–24 of 80 results
-
Alabama, Arizona, Arkansas, Code Books, Concrete/Rebar, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Virginia
(ACI Code 318-14) Building Code Requirements for Structural Concrete
Alabama, Arizona, Arkansas, Code Books, Concrete/Rebar, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Virginia(ACI Code 318-14) Building Code Requirements for Structural Concrete
The (ACI Code 318-14) Building Code Requirements for Structural Concrete provides minimum requirements for the materials, design, and detailing of structural concrete buildings and, where applicable, nonbuilding structures. This Code addresses structural systems, members, and connections, including cast-in-place, precast, plain, non-prestressed, prestressed, and composite construction.
SKU: 9780870319303 -
-
Construction, Industries, North Carolina, States, Tabs
2018 North Carolina Residential Code Tabs
Pre-Printed Permanent Tabs – During your exam, time is of the essence. By having your pages tabbed, you can greatly increase your speed in referencing key exam topics.
These tabs are pre-printed and permanent.
SKU: 2018NCRCTabs -
Alabama, Arkansas, Code Books, Colorado, Connecticut, Construction, Electrical, Florida, Georgia, Idaho, Industries, Iowa, Kentucky, Louisiana, Massachusetts, Michigan, Minnesota, Nebraska, New Jersey, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, South Dakota, States, Texas, West Virginia, Wyoming
2023 National Electrical Code – NFPA 70
Alabama, Arkansas, Code Books, Colorado, Connecticut, Construction, Electrical, Florida, Georgia, Idaho, Industries, Iowa, Kentucky, Louisiana, Massachusetts, Michigan, Minnesota, Nebraska, New Jersey, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, South Dakota, States, Texas, West Virginia, Wyoming2023 National Electrical Code – NFPA 70
- The code you—and the world—depend on to keep pace with ever-evolving electrical hazards and challenges.
NFPA 70®, National Electrical Code® (NEC®), is the authoritative document addressing electrical installations in residential, commercial, and industrial settings. The NEC is revised every three years to stay in sync with industry practices, emerging trends, and the development and introduction of technologies to provide comprehensive rules for designers, installers, inspectors, engineers, electricians, and anyone else who works in the electrical industry. The code is organized for ease of use.
SKU: 7023SB -
Alabama, Arizona, Connecticut, Construction, Delaware, Georgia, HVAC-R, Industries, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, States
ACCA Ductulator – Duct Calculation Slide Rule
Alabama, Arizona, Connecticut, Construction, Delaware, Georgia, HVAC-R, Industries, Louisiana, Maryland, Mississippi, North Carolina, Oklahoma, South Carolina, StatesACCA Ductulator – Duct Calculation Slide Rule
One of our most popular catalog items! This durable two-sided plastic sizing wheel comes with a complete instruction manual for residential and commercial duct-sizing procedures. Designed by Hank Rutkowski.
SKU: 978-1892765147 -
Alabama, Arizona, Code Books, Construction, Industries, Masonry, Nevada, New Mexico, North Carolina, States, Tennessee
ACI CODE-530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
Alabama, Arizona, Code Books, Construction, Industries, Masonry, Nevada, New Mexico, North Carolina, States, TennesseeACI CODE-530/530.1-13: Building Code Requirements and Specification for Masonry Structures and Companion Commentaries
ACI 530/530.1-13, “Building Code Requirements and Specification for Masonry Structures and Companion Commentaries,” is a joint document between ACI, The Masonry Society (TMS), and the American Society of Civil Engineers (ASCE). Beginning with the 2016 edition of this document, TMS is solely responsible for the development of this document. The 2016 edition can be purchased through the ACI Store, as well as other historical editions.
SKU: 53013 -
Alabama, Alaska, Arizona, Arkansas, Carpentry, Construction, Georgia, Hawaii, Industries, Louisiana, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, Virginia
Carpentry & Building Construction, Student Edition, 2016 1st Edition
Alabama, Alaska, Arizona, Arkansas, Carpentry, Construction, Georgia, Hawaii, Industries, Louisiana, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, VirginiaCarpentry & Building Construction, Student Edition, 2016 1st Edition
This newly revised edition includes content from McGraw-Hill Construction, where the professionals stay informed on the latest industry developments.
SKU: 9780021402441 -
Alabama, Arizona, Concrete/Rebar, Construction, Florida, Industries, Louisiana, Mississippi, New Mexico, North Carolina, States, Tennessee, Virginia
Design and Control of Concrete Mixtures 17th edition
Alabama, Arizona, Concrete/Rebar, Construction, Florida, Industries, Louisiana, Mississippi, New Mexico, North Carolina, States, Tennessee, VirginiaDesign and Control of Concrete Mixtures 17th edition
This Design and Control of Concrete Mixtures 17th edition, presents the properties of concrete as needed in concrete construction, including strength and durability. All concrete ingredients (cementing materials, water, aggregates, admixtures, and fibers) are reviewed for their optimal use in designing and proportioning concrete mixtures. Applicable ASTM, AASHTO, and ACI standards are referred to extensively. The use of concrete from design to batching, mixing, transporting, placing, consolidating, finishing, and curing is addressed. Concrete sustainability, along with special concrete, including high-performance concrete, are also reviewed.
SKU: 9780893122805 -
Alabama, Arizona, Arkansas, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, Virginia
Erector’s Manual: Standards and Guidelines for the Erection of Precast Concrete Products Paperback
Alabama, Arizona, Arkansas, Construction, Georgia, Industries, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, VirginiaErector’s Manual: Standards and Guidelines for the Erection of Precast Concrete Products Paperback
Erectors’ Manual, Standards and Guidelines for the Erection of Precast Concrete Products, is intended to provide standards (shown in boldface) and corresponding guidelines (commentary) for the erection of plant-produced precast and prestressed concrete products, and to establish a level of quality that will be recognized and respected by the construction industry.
SKU: MNL127 -
Alabama, Arizona, Concrete/Rebar, Construction, Industries, Mississippi, North Carolina, States, Virginia
Formwork for Concrete – 8th edition
Alabama, Arizona, Concrete/Rebar, Construction, Industries, Mississippi, North Carolina, States, VirginiaFormwork for Concrete – 8th edition
Formwork for concrete refers to the temporary or permanent molds used to shape and support concrete while it hardens. It plays a crucial role in construction by ensuring the concrete retains its intended shape, strength, and finish. There are various types of formwork, including timber, steel, and aluminum, each with its own advantages and disadvantages. Timber formwork is adaptable and cost-effective but has a short lifespan. Steel formwork is durable and reusable but requires lifting equipment. Aluminum formwork is lightweight and efficient but may not be as strong as steel. Properly designed formwork enhances safety, efficiency, and quality in construction projects. It must be rigid, watertight, and easy to remove without damaging the concrete
SKU: 9780870319129 -
Alabama, Alaska, Arizona, Arkansas, Construction, Florida, Georgia, Industries, Louisiana, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Utah, Virginia
Guide to Handling, Installing, Bracing Wood Trusses – 2025
Alabama, Alaska, Arizona, Arkansas, Construction, Florida, Georgia, Industries, Louisiana, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Utah, VirginiaGuide to Handling, Installing, Bracing Wood Trusses – 2025
The Guide to Handling, Installing, Bracing Wood Trusses – 2025 will provide users, including component manufacturers, designers, framers, and building officials with an easy to understand, and use, guide that provides background information as well as prescriptive recommendations for the safe installation and bracing of floor and roof trusses. The new version of the flagship documents represents a complete revision to the document. Most notably, the historic B-series arrangement of the document has been transformed into a document with a chapter layout including section numbering to streamline content in a chronological order and reduce content redundancy. Additionally, content is presented in a single column text format with updated graphs. The technical content and prescriptive recommendations in the guide were enhanced, clarified, and improved as well.
SKU: BCSI2025 -
Alabama, Arizona, Arkansas, Code Books, Construction, Georgia, Industries, Mississippi, Nevada, North Carolina, OSHA & Safety, South Carolina, States, Utah, Virginia
ICC A117.1-2017 Standard for Accessible and Usable Buildings and Facilities Paperback
Alabama, Arizona, Arkansas, Code Books, Construction, Georgia, Industries, Mississippi, Nevada, North Carolina, OSHA & Safety, South Carolina, States, Utah, VirginiaICC A117.1-2017 Standard for Accessible and Usable Buildings and Facilities Paperback
The ICC A117.1-2017 Standard for Accessible and Usable Buildings and Facilities is a comprehensive guide developed by the International Code Council (ICC) to ensure that buildings and facilities are accessible and usable by individuals with physical disabilities. This standard is widely adopted by government agencies and organizations to update local building codes, aligning with the Americans with Disabilities Act (ADA) and the Fair Housing Accessibility Guidelines.
SKU: AnsiA11712017 -
Construction, HVAC-R, Industries, North Carolina, States
Manual CS – Commercial Application, Systems, and Equipment
Construction, HVAC-R, Industries, North Carolina, StatesManual CS – Commercial Application, Systems, and Equipment
Manual CS covers the fundamentals of system design and equipment selection for office buildings, apartments, schools, restaurants, arenas, gyms, malls, arcades, motels, theaters and other small and mid-size commercial structures. It discusses the considerations—comfort, air quality, and operating costs—that go into a preliminary design. Examples of the procedures and calculations turn concepts into final design.
SKU: 61 -
Alabama, Arizona, Construction, Georgia, HVAC-R, Industries, Louisiana, Michigan, Mississippi, North Carolina, South Carolina, States, Texas, Utah
Manual D – Residential Duct Systems [ANSI/ACCA 1 Manual D – 2016]
![Manual D - Residential Duct Systems [ANSI/ACCA 1 Manual D - 2016]](https://www.athomeprepbookstore.com/wp-content/uploads/2026/06/Manual-D-300x300.jpg)
Alabama, Arizona, Construction, Georgia, HVAC-R, Industries, Louisiana, Michigan, Mississippi, North Carolina, South Carolina, States, Texas, UtahManual D – Residential Duct Systems [ANSI/ACCA 1 Manual D – 2016]
Manual D is the nationally recognized standard for designing residential duct systems, published by the Air Conditioning Contractors of America (ACCA). The 2016 edition, aligned with ANSI standards, outlines the procedures necessary to design efficient, quiet, and code-compliant air distribution systems in single-family homes and townhouses.
SKU: 9781892765505 -
Alabama, Arizona, Arkansas, Construction, Delaware, Georgia, HVAC-R, Industries, Maryland, Michigan, Mississippi, North Carolina, Oklahoma, South Carolina, States, Tennessee, Texas, Utah
Manual J Residential Load Calculation (8th Edition Version 2.50)
Alabama, Arizona, Arkansas, Construction, Delaware, Georgia, HVAC-R, Industries, Maryland, Michigan, Mississippi, North Carolina, Oklahoma, South Carolina, States, Tennessee, Texas, UtahManual J Residential Load Calculation (8th Edition Version 2.50)
Manual J 8th Edition Version 2.50 is the national ANSI-recognized standard for producing HVAC equipment sizing loads for single-family detached homes, small multi-unit structures, condominiums, town houses, and manufactured homes. A proper load calculation, performed in accordance with the Manual J 8th Edition procedure, is required by national building codes and most state and local jurisdictions.
SKU: 9781892765352 -
Connecticut, Construction, HVAC-R, Industries, Louisiana, Mississippi, Nevada, North Carolina, Oklahoma, South Carolina, States, Tennessee
Manual N – Commercial Load Calculation for Small Commercial Buildings, 5th Edition
Connecticut, Construction, HVAC-R, Industries, Louisiana, Mississippi, Nevada, North Carolina, Oklahoma, South Carolina, States, TennesseeManual N – Commercial Load Calculation for Small Commercial Buildings, 5th Edition
The Manual N – Commercial Load Calculation for Small Commercial Buildings, 5th Edition, from the Air Conditioning Contractors of America (ACCA), details the correct HVAC load calculation procedure for small and midsize commercial buildings. This new edition addresses advances in the commercial construction industry, such as new materials, methods of assembly, and operational requirements. It provides instruction to help contractors and designers satisfy new (and often conflicting) energy, ventilation, and comfort requirements. Manual N is divided into four sections providing both a quick procedure, and a more comprehensive procedure, based on the requirements of your application.
SKU: 9781892765383 -
Construction, HVAC-R, Industries, North Carolina, States
Manual Q Commercial Low Pressure Low Velocity Duct System Design 1st Edition ACCA
Construction, HVAC-R, Industries, North Carolina, StatesManual Q Commercial Low Pressure Low Velocity Duct System Design 1st Edition ACCA
Manual Q is your one-stop reference book on the low-pressure, low-velocity systems used in small and mid-size commercial buildings. Manual Q gives you time-saving “quick” fitting loss tables and a complete set of fitting loss tables compiled from the ASHRAE and SMACNA handbooks. This manual is an essential resource for HVAC professionals involved in the design and implementation of duct systems in small to mid-sized commercial buildings, ensuring systems are properly sized, efficient, and compliant with industry standards.
SKU: 978-1892765024 -
Alabama, Alaska, Arizona, Arkansas, Construction, Georgia, Hawaii, Industries, Louisiana, Masonry, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, Virginia, West Virginia
Modern Masonry: Brick, Block, Stone Tenth Edition
Alabama, Alaska, Arizona, Arkansas, Construction, Georgia, Hawaii, Industries, Louisiana, Masonry, Michigan, Mississippi, Nevada, New Mexico, North Carolina, South Carolina, States, Tennessee, Utah, Virginia, West VirginiaModern Masonry: Brick, Block, Stone Tenth Edition
The Modern Masonry: Brick, Block, Stone Tenth Edition provides a thorough foundation in the methods of laying brick, block, stone, and concrete, and presents a broad understanding of materials and their properties. The textbook is organized into functional sections closely related to the needs of apprenticeship training programs, college programs, and other related instruction. Simply and clearly written, this text covers all the important aspects of the masonry trade. Over 75 step-by-step procedures for laying brick, block, stone, and concrete provide clear explanations of recommended techniques for a variety of masonry jobs. This new edition includes the newest materials and building techniques used in the industry, including insulated concrete wall forms, insulated blocks, brick veneer, and special masonry units. The text also encourages professionalism in the field, including work habits, safety habits, continuing education, work ethic, teamwork, and leadership, to prepare students for successful and rewarding masonry careers. Digital users have access to the eBook, online Lab Workbook content, Virtual Toolbox, Understanding Measurement Tools videos, and interactive activities.
SKU: 9798891188174 -
Alaska, Arizona, Arkansas, Connecticut, Construction, Delaware, HVAC-R, Industries, Iowa, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Ohio, Oklahoma, South Carolina, States, Tennessee, Texas, Utah, Virginia, Washington D.C.
Modern Refrigeration and Air Conditioning, 22nd Edition
Alaska, Arizona, Arkansas, Connecticut, Construction, Delaware, HVAC-R, Industries, Iowa, Louisiana, Maryland, Mississippi, Nevada, New Mexico, North Carolina, Ohio, Oklahoma, South Carolina, States, Tennessee, Texas, Utah, Virginia, Washington D.C.Modern Refrigeration and Air Conditioning, 22nd Edition
The Modern Refrigeration and Air Conditioning, 22nd Edition is the HVACR standard for a new generation of learners. It correlates to HVAC Excellence and PAHRA accreditation requirements to ensure complete coverage that prepares students for career success.
SKU: 979888174890 -
Alarms, Alaska, Code Books, Connecticut, Construction, Industries, Nevada, North Carolina, States, Virginia
NFPA 72®: National Fire Alarm and Signaling Code, 2013 Edition
Alarms, Alaska, Code Books, Connecticut, Construction, Industries, Nevada, North Carolina, States, VirginiaNFPA 72®: National Fire Alarm and Signaling Code, 2013 Edition
Get insights on the latest requirements for the design, installation, inspection, testing, and maintenance of fire alarm and emergency communications systems. The NFPA 72: National Fire Alarm and Signaling Code is the standard that provides requirements that reflect the needs and concerns of code users in the field today. Consult the most advanced and comprehensive requirements ever developed for the application, installation, location, performance, and inspection, testing, and maintenance (ITM) of fire alarm and emergency communications systems, including mass notification systems (MNS), used to protect life and property.
SKU: 7213 -
Business and Law, Construction, Industries, North Carolina, States
North Carolina – NASCLA Contractors Guide to Business, Law and Project Management, 10th Edition Spiral-bound
Business and Law, Construction, Industries, North Carolina, StatesNorth Carolina – NASCLA Contractors Guide to Business, Law and Project Management, 10th Edition Spiral-bound
North Carolina, Business and Project Management for Contractors, General Contractors edition is designed to provide an overview of business management subjects for general contractor examination candidates applying for a license from the North Carolina Licensing Board.
SKU: 9781948558389
